NG Kütahya Seramik

 

Exclusive Dealer — Oman

NG Kütahya Seramik Premium Porcelain Tiles in Oman

Turkish Innovation. European Standards. Built for Oman.

Al Fanar Group is Oman’s exclusive NG Kütahya Seramik dealer — bringing Turkey’s leading porcelain tile manufacturer to homes, villas and commercial spaces across the Sultanate. Large format, marble-effect, wood-look and outdoor tiles, in stock and available with professional installation.

NG Kütahya Seramik exclusive dealer Oman — Al Fanar Group
1989 Est. Turkey
1B+ Sq Ft / Year
<0.5% Water Absorption
About NG Kütahya Seramik

Turkey’s Leading Porcelain Tile Manufacturer

Founded in 1989 in Kütahya, Turkey — a city with over 500 years of ceramic heritage — NG Kütahya Seramik has grown into one of the world’s largest porcelain tile producers.

NG Kütahya Seramik was established in 1989 in Kütahya, Turkey — a region with a ceramic manufacturing tradition dating back to the 15th century. Part of the NG Group, the company has grown into one of the world’s largest porcelain tile producers, manufacturing over one billion square feet of tiles annually using state-of-the-art SACMI machinery that brings Italian design heritage together with advanced production technology. Visit the official NG Kütahya Seramik website →

NG Kütahya’s product range spans large format porcelain slabs, marble-effect tiles, wood-look planks, stone and concrete looks, and outdoor anti-slip collections — all produced to ISO standards with water absorption rates below 0.5%. This technical performance makes NG Kütahya tiles exceptionally well-suited to Oman’s demanding climate, where coastal humidity, intense UV exposure and extreme temperature variation require materials that outperform standard ceramics.

In Oman, NG Kütahya Seramik is available exclusively through Al Fanar Group, with stock held locally across our four showrooms in Muscat, Sohar and Nizwa. Our tile specialists guide you through format selection, finish choices and installation requirements for every project.

🏭 World-Scale Manufacturing

Over one billion square feet produced annually using SACMI machinery — one of the world’s largest single-site porcelain tile manufacturing operations.

💧 <0.5% Water Absorption

NG Kütahya porcelain tiles meet the strictest ISO standards for water absorption — critical for moisture resistance in Oman’s coastal and humid environments.

☀️ UV & Heat Stable

Glazes and through-body finishes are tested for UV resistance and heat stability — maintaining colour and surface integrity in Oman’s intense sun exposure.

📐 Large Format Capability

Slabs up to 160x320cm and 120x240cm create seamless, minimal-grout-line interiors that are cleaner to maintain and more visually impactful.

Product Range

NG Kütahya Collections Available in Oman

From large format living room slabs to anti-slip outdoor terraces — Al Fanar Group stocks NG Kütahya Seramik’s most popular collections for residential and commercial projects across Oman.

Category 01

Large Format Porcelain Slabs

Rectified large format tiles in 160x320cm, 120x240cm, 120x120cm and 60x120cm formats. Minimal grout lines, seamless installation and a premium contemporary finish for living rooms, hallways and open-plan spaces.

160x320cm 120x240cm Rectified Minimal Grout
Category 02

Marble-Effect Collections

Porcelain tiles that replicate the appearance of natural marble — Carrara white, Calacatta gold, Nero Marquina and Emperador brown — with the durability and stain resistance that natural stone cannot match.

Carrara Calacatta Nero Marquina Polished Finish
Category 03

Wood-Look Plank Tiles

Porcelain tiles with realistic wood-grain textures in oak, walnut and wenge tones. All the warmth of timber flooring with none of the maintenance challenges — UV stable, moisture resistant and scratch proof.

Oak Walnut 18x118cm Matte Finish
Category 04

Stone & Concrete Effect

Slate, travertine, limestone and concrete-look collections for a raw, natural aesthetic. Available in matte and semi-matte finishes with natural surface textures that add depth and warmth to contemporary interiors.

Slate Look Concrete Effect Travertine Matte Finish
Category 05

Bathroom & Wall Tiles

Dedicated bathroom wall and floor tile collections in smaller formats — 30x60cm, 60x60cm, 33x66cm — with wet-area anti-slip ratings and moisture-resistant glazes suited to Oman’s hard water conditions.

Anti-Slip R10 30x60cm 60x60cm Wet Areas
Category 06

Outdoor & Terrace Tiles

Heavy-duty outdoor porcelain with R11/R12 anti-slip ratings, enhanced UV resistance and 20mm thick formats for driveways and pool surrounds. Engineered to withstand Oman’s temperature extremes and intense direct sunlight.

Anti-Slip R11 20mm Thick Pool Areas UV Resistant
Why Choose NG Kütahya

Engineered for Performance in Oman’s Climate

NG Kütahya Seramik’s technical performance specifications make it one of the most suitable tile brands for Oman’s demanding coastal and desert conditions.

01

Below 0.5% Water Absorption

NG Kütahya porcelain tiles are fired at extreme temperatures to achieve water absorption rates below 0.5% — the ISO standard threshold for full-body porcelain. This near-zero porosity makes them highly resistant to moisture damage, staining and bacterial growth in wet areas.

02

Rectified Edges for Minimal Grout Lines

Precision-cut rectified edges allow tiles to be laid with 1–2mm grout joints rather than the 3–5mm standard. Fewer grout lines means less calcium build-up from Oman’s hard water, easier cleaning, and a seamless contemporary finish that makes spaces look larger.

03

Through-Body Colour Technology

NG Kütahya’s through-body manufacturing process ensures the tile’s colour and pattern extends through its full thickness — so chips and wear don’t expose a different colour beneath. Critical for high-traffic floors in Omani villas and commercial spaces.

04

UV-Stable Glazes

NG Kütahya glazes are tested for UV resistance and colour stability under prolonged sun exposure — maintaining their original appearance in south and west-facing sun-exposed spaces where inferior tile glazes fade within a few years.

05

Scratch & Chemical Resistance

NG Kütahya porcelain achieves PEI Class 4–5 abrasion resistance and is highly resistant to household cleaning chemicals, acidic liquids and alkaline cleaners — making them suitable for kitchens, bathrooms, and high-traffic living areas without special maintenance requirements.

06

Pairs with Turkuaz Seramik Sanitaryware

Al Fanar Group supplies both NG Kütahya floor and wall tiles and Turkuaz Seramik ceramic sanitaryware — allowing you to specify and install a fully coordinated bathroom from a single supplier, with matched finishes and a single installation team.

Why Buy From Al Fanar

Oman’s Exclusive NG Kütahya Dealer

🏅

Official & Exclusive

Al Fanar Group is NG Kütahya Seramik’s authorised and exclusive dealer in Oman — guaranteeing genuine products and manufacturer support.

📦

Local Stock

Popular collections are held in stock locally across our showrooms — no long international lead times for standard residential and villa projects.

🏪

4 Showrooms

See and touch tile finishes in person at our showrooms in Muscat (×2), Sohar and Nizwa before committing to your selection.

🔨

Installation Support

Our team advises on correct adhesive, grout, expansion joint specification and installation methods — ensuring your tiles perform as intended.

FAQ

Frequently Asked Questions About NG Kütahya Tiles in Oman

Everything you need to know about buying NG Kütahya Seramik tiles through Al Fanar Group in Oman.

Yes. Al Fanar Group is Oman’s exclusive authorised dealer for NG Kütahya Seramik. We stock the complete product range of porcelain tiles across our showrooms in Muscat, Sohar and Nizwa — with full manufacturer warranty and local after-sales support.
NG Kütahya Seramik produces tiles in a wide range of formats including large format slabs (160x320cm, 120x240cm, 120x120cm), standard formats (60x120cm, 60x60cm, 30x60cm) and plank formats for wood-look collections (18x118cm, 20x120cm). Large format tiles are particularly popular in contemporary Omani villa interiors for their seamless, minimal-grout-line finish.
Yes. NG Kütahya Seramik porcelain tiles have a water absorption rate below 0.5% — making them highly resistant to moisture damage in coastal humid areas like Muscat and Sohar. They are also UV-stable and heat-resistant, maintaining their appearance under Oman’s intense sunlight and extreme summer temperatures.
Yes. NG Kütahya produces dedicated outdoor porcelain collections with R11/R12 anti-slip ratings and 20mm thick formats for driveways and high-load areas. These tiles are engineered to withstand Oman’s temperature extremes and UV exposure, making them suitable for terraces, pool surrounds, pathways and garden areas.
We recommend ordering 10–15% extra tiles above your calculated coverage to account for cuts, breakages and future repairs from the same batch. Tile colours and finishes vary slightly between production batches — having tiles from the same batch ensures a consistent appearance throughout your project and any future repairs.

Ready to Specify NG Kütahya Tiles for Your Project?

Visit Al Fanar Group’s showrooms in Muscat, Sohar or Nizwa to browse the NG Kütahya Seramik collection in person, request samples and consult with our tile specialists. We provide free project advice, quantity calculations and coordinated supply with sanitaryware and drainage products.